Specific methods and measures to extend the service life of h

Zhengzhou Batte Melt Pump Manufacturing Enterprise has rich experience in effectively maintaining the daily use of melt pumps. The manufacturer of Batte melt pump will analyze the specific methods and measures taken to extend the service life of high-temperature melt pumps.

1. Due to the high temperature operation of the pump body of the high-temperature melt pump, hinge supports need to be installed on the piping during the cold installation of the high-temperature melt gear pump to prevent displacement of the piping after heating up.

2. It is necessary to set an interlock stop alarm at the outlet pressure measuring point of the high-temperature melt pump. The reason for this is that once the discharge pipe of the melt pump is blocked, it can easily cause damage to the pump body.

3. When starting the melt pump and there is usually no pressure formed at the outlet, it is not advisable to blindly increase the speed to prevent damage to the shaft or bearing of the high-temperature melt pump.

4. The acceleration of the melt pump should also be carried out slowly; Never make the front and rear pressure of the melt gear pump rise sharply, in order to avoid damaging the bearings or causing the melt to block the lubrication channel.

The above precautions can effectively extend the service life of high-temperature melt gear pumps and achieve greater production value.

Email: info@battemachinery.com

WhatsApp: +86 158 38331071